WEBERmade Application Tape Tool
* Application Tape Always Ready for Instant Use
* Choice of Singe or Double Shaft Tape Tools
* Ready To Use Single or Multiple Widths of Tape
* Adjustable Clutch to Control Tape Tension
* Apply Tape quickly, effortlessly and flawlessly
* Easily and Safely Apply Tape Professionally

General Information

How the Application Tape Tool works

The WEBERmade Tape Tool

Once you get your tape tool clamped or bolted to your table or work bench, you adjust the tension of your tape coming off the roll with a quick turn of the tensioning knob and simply pull your application tape out, over and just past the end of your vinyl. Once you have your tape out and over your vinyl, you simply fasten the application tape to your table and squeegee it down onto the vinyl back towards the roll of application tape. The tension that you set with the clutch keeps your application tape up and off your vinyl until you squeegee it down.

Nothing could be easier.

Each tape tool is shipped with complete detailed instructions.

In fact, the WEBERmade Tape Tool works so well and is built so strongly, the manufacturer backs it up with a lifetime warranty.

When people see the tape tool at a sign show they say things like, "Wow!, this is great!" "This is the first system I've seen that isn't Mickey Mouse!" "It's about time someone came up with something that works great and is priced reasonably!" etc... Be sure to check out the Quotable Quotes. There is a good chance that you know some of these people. Many of them are monthly contributing writers for the sign magazines.

What isn't said in the quotes is:

The WEBERmade clamps to the end of any work bench or table in minutes. Therefore, it does not take up any valuable work area and is always there ready to go to work for you. Our unique clamp-on mounting end brackets make it quick and easy for you to set up and the Tape Tool is also easily moved from one location to another.

Both the Single Shaft and the Double Shaft Tape Tools clamp to any surface up to 4 inches thick or alternatively may be bolted into place.

Your satisfaction is important to WEBERmade. Nothing frustrates us more than when someone cuts corners. WEBERmade assure you that had they made this tape tool just to make a dollar, they would have designed it a lot differently.

Not only that but there is a good chance that we will run into each other at a trade show. And if we do, I am confident that you will only have positive things to say about our tape tool. Anyway, after making and selling these for 12 years, that's exactly what has happened. And if for some reason you are not happy with the tape tool, WEBERmade guarantee you that they will do whatever it takes to make it right with you.

It is WEBERmade's belief that the main difference between companies is the way they treat their customers. Also, a guarantee is only as good as the company behind it and a company is only as good as the people in it.

Be sure to check out the WEBERmade guarantee and lifetime warranty. They are both for your assured satisfaction.

Both The Single Shaft and the Double Shaft Tape Tools are available in 4 sizes.

  • 16 inch (40cm)
  • 24 inch (61cm)
  • 36 inch (91cm)
  • 48 inch (122cm)

In figuring out which of the 4 sizes to chose from, the size of your plotter is not a factor. Reason being, you can put more than one roll of tape on the shaft at the same time.

You should take into consideration the width of your table or work bench where you are planning to use it.

Any combination of application tape widths can be used.

Various Widths of Tape can be usedVarious Widths of Tape can be used

For example, the 24 inch tape tool will hold up to 24 inches of tape. You can put on one roll of 24 inch tape or you can put on any configuration of rolls of tape up to 24 inches wide. You can also put on one roll of tape any size up to 24 inches wide. You can, but you don't have to fill up the shaft with tape.

The end support mounting brackets when they are fastened to your table are 3 inches wider than the tape tool. ie. The 24 inch tape tool mounting brackets when properly mounted measure 27 inches to the outside edges .

Many people elect to invest in a tape tool that is wider than where they are planning on using it. This allows you the opportunity to custom fit it to your work bench or table.

We have all sizes in stock and ship the same day orders are received. The only exception to this is when we are at a trade show.

The WEBERmade Tape Tool is clearly the professionals choice.

We are here for you. If you have any questions, don't hesitate to contact me by email, or in the UK contact my distributor

Phone: (+44) 01908 371 494
email: sales@webermade.co.uk

For further details and information on the different Tape Tool options, click the appropriate choices on the menu to your left, or on one of the options below